Maintenance Tips

KEEP YOUR BEAUTIFUL NATURAL STONE LOOKING LIKE NEW!

DAILY MAINTENANCE

Dust mop! Dust mop! Dust mop!
Sand, dirt and grit do the most damage to natural surfaces. Use a clean non-treated dry dust mop at least two or three times a day in high traffic areas and less often in low traffic areas.

Walk-off mats inside and outside an entrance will help to minimize sand, dirt and grit that will scratch and dull the stone's surface.

CLEANING

Clean polished and unpolished natural stone surfaces daily in high traffic areas. Use a clean rayon or cotton string mop with cold or warm water and a good quality neutral cleaner.

Follow the directions for the cleaner carefully; too much may leave a film and cause streaks.

PROTECTION

Stone floors exposed to water and spills should be protected with a silicone penetrating sealer. table and countertops should also be protected with a penetrating sealer and paste wax to protect the stone against water rings and spotting.

SPILLS AND STAINS

Blot the spill with a paper towel; don't wipe--it will spread the spill.

Flush the area with plain water and stone soap and rinse several times. Repeat several times if necessary.

If the stain remains, a chemical poultice may be required. Check with your stone supplier or restoration firm for poulticing methods.

RESTORATION

Restoration calls for the knowledge and expertise of a professional. With regular maintenance, natural stone surfaces may not have to be restored or refinished for several years.